201.1 Absorption Tube, Calcium Chloride : Straight form, with one bulb, heavy walls, glass.
Dimensions :
a) 100 x 12 mm Length x Bore
b) 125 x 15 mm Length x Bore

201.2 Absorption Tube, U-Form : With heavy walls, glass.
Dimensions :
a) 100 x 12 mm Height x Bore
b) 125 x 15 mm Height x Bore
c) 150 x 18 mm Height x Bore

201.3 Absorption Tube, Calcium Chloride U-Form : With side arms, heavy walls, glass.
Dimensions :
a) 100 x 12 mm Height x Bore
b) 125 x 15 mm Height x Bore
c) 150 x 18 mm Height x Bore

201.4 Absorption Tower, Calcium Chloride : Cylindrical with tubule at base, glass.
Capacity : 250 ml.
Dimensions : 335 mm height x 65 mm dia.

201.5 Aspirator, Glass : With stopcock at bottom and stopper in neck. 

201.8 Autoclave, Electric : Made of entire aluminium of die press drum of heavy gauge to withstand of hydraulic pressure 40-50 per square inch. The drum having six fly nuts knobs along with nuprine rubber gasket to avoid leakage of pressure. The lid is fitted with pressure gauge, safety valve and steam releasing cock. A extra safety valve is also provided. The autoclave is fited with immersion heating element for electrical operation. The autoclave supplied with tripod stand, handle plug and cord and also inner basket.
Capacity : 13 Liters approx.
Release Pressure : 70 knm2 (10 psig), 100knm2 (15 psig)
Internal temperature : 116°C (in total absence of air), 121°C (in total absence of air).
Internal dimensions (Boiler) : 280 mm dia x 255 mm deep.

201.9 Physical Balance : It is sensitive precision balance.
Technical Data :
Beam : Finest light brass beam
Knife-edges and planes : made of finest agate
Arrestment : to beam and suspensions highly polished metal pillar fitted with six point Arrestment and extended support and single block guide.
Case : Wodden polished case with divided doors.
Maximum Capacity : 250 Gms
Sensitivity : 1mg

201.10 Chemical Balance : For use in colleges and Industrial Laboratories.
Technical Data :
Beam : Short beam of hard brass. The upper edge divided into 50 scales divisions to each side. Each scale division representing 1/5 mg. Rider on the scale.
Stand : All parts of brass.
Arrestment : Vertical raising type.
Pans : Chromium plated, slightly concave inwards.
Case : Wooden polished case, with front slider and two side doors.
Base : Sunmica black board.
Capacity : 200gms
Sensitivity : 1/5 mg

201.10 Balances Cases : Highly polished hard wood, sliding front door, realease catch device on the side, large enough to accomodate balance of 250 gms cap. size 180x400x375 mm

201.11 Balance Covers : Made of PVC with welded seams 460x120x360mm

201.12 Analytical Balance : Rapid weighing short triangular beam analytical balance suitable for research Laboratories for precision work.
Technical Data :
Beam : Triangular short beam gun metal alloy. The rider scale fitted infront of the beam is provided with 100 notches with zero at the centre.
Knife edges and Planes : Made of finest agate.
Arrestment : Vertical raising type.
Stand : All parts of bras
Pans : Chromium plates, slightly concave inwards dia 7.5 cm.
Case : Teak-wood polished case with front slider and two side doors.
Base : Sunmica black board.
Maximum Capacity : 200 gms
Sensitivity : 1/10 mg

201.13 Balance Chainomatic : Eliminates entirely all fractional weights and thereby speeds up weighings. Specially suitable for industrial and Technical Laboratories.
Technical Data :
Chainomatic arrangement : A gold chain is suspended from the beam with its other end screwd on a rotating drum on which a scale is graduated from 0 to 110 divisions, each division representing 1 mg. By the movement of this scale before a vernierr reading upto 1/10 mg. is taken.
Air Damping Arrangement : It is specially provided to make the oscillation aperodic and rapid.
Beam : Flexure freebridge type beam without graduation. Made of special alloy.
Stand : All brass including capot and base.
Arrestment : Circular type to give longer life to knife edges
Knife Edges and planes : Finest agate, accurately ground.
Pan : Chromium plated, slightly concave inwards.
Case : Highly polished, well seasoned teak wood case.
Base : Synthetic black board.
Capacity : 200gms
Sensitivity : 1/10mg
Length of beam : 14cm
Height of stand : 26.5cm
Height of Long suspension : 21cm
Pan Diameter : 7.5 cm

201.14 Balance Air-Damped : Aperiodic balance with short and compensatory suspension. A very popular model for routine use in Scientific Industrial laboratories and high classes. Time of ascillation reduced by Air Damping.
Technical Data :
Beam : Short beam of hard gun metal alloy, The upper edge divided into 50 scale divisions to each side.
Each side divisions representing 1/5 mg when placing a 10mg rider on the Scale.
Stand : All brass including capot and base.
Arrestment : Automatic Precision Parallel Arrestmewnt
Knife Edges and planes : Finest agate, accurately ground.
Case : Highly polished, well seasoned teak wood case.
Base : Synethetic Black Board.
Capacity : 200gms
Sensitiveness : 1/10mg
Length of beam : 14 cm
Height of stand : 26.5 cm
Height of Long suspension : 21 cm
Pan Diameter : 7.5 cm

201.15 Beranger Balance : Cast iron moulded body. All working parts of tempered steel, easily replaceable single piece wide beam. Spray painted finish, both side removable stainless stewel pan dia 200 mm, with protection bearings and pointer at the centre, useful for quick weighing of heavy articles. 

201.17 Triple Beam Balance : A single pan, low from beam that will weigh upto 2610 gm when used with supplementry mases. the balance has three notched weighing beams with center indicating sliding masses, giving total weighing capacity of 610gm. Additional masses are hung on the end of the beam increasing the capacity by upto 2610gm. and they can be stored in the recessed base when not required with magnetic damping for quick weighing.
Equipped with facility for under balance weighing.
Beams : 0-500 g x 100g; 0-100g x 10g; 0-10g x 0.1g
Supplimentry masses 2 x 1000 gm & 1 x 500gm
Pan, stainless steel, diameter 150mm

201.18 Balance Four Beam (Suspended Pan) : A 4 beam balance with a suspended pan. Weighing capacity 311g. Sensitivity 0.01g. Height of stirrup approx 190mm. Beams notched. Four beams each provided with a slider, and graduated
0-200g x 100g, 0-100g x 10g, 0-10g x 1 g and 0-1g x 10mg respectively.

201.19 Balance Bridge : Made of Aluminium, for density determinations using a beam balance with the pan and stirrup retained in position.
Dimension : 130x50x50mm high.

201.20 Forcep : Brass chrome plated, with curved ends, length 90mm

201.21 Analytical Masses : Weights are of brass chrome plated in 1-2-2-5 series in velvet lined wooden box nicely polished with hinged lid. One 10 mg rider and forcep. Transparent cover to protect the fractionals from dust. Accurate. 

201.23 Balance Weight : Single pieces, of Chromplated brass, in open wooden block with forceps and frictional weights 1mg to 500mg Set consists of 1,2,35,10,20,50,100,200,500,1000,2000 gm.

201.24 Masses Set (General Purpose) : Precision of chrome plated in1-2-5 series. Minor fractionals are of aluminium and major fractionals are of Brass, 10mg rider is nickelled, complete box to protect them from loss. Set is in polished wooden box. 

201.26 Personal Weighing Scale : Platform-type scale, calibrated 125x0.5 kg. With zero adjustment and magnifier over scale opening. Accurate, sensitive and portable.

201.27 Household Weighting Scale : A highly acurate and sensitive scale, exclusive durable ultramodern shape. Wide view dial, large scoop pan, anti rust coated part. Capacity : 5 Kg x 25 gms.

201.28 Mail/Lab Scale : For weighing chemicals and related items and mixing ingredients in proportions. This scale is highly accurate and sensitive scale, slim line exclusive Durable Ultramodern Shape. Capacity 1/2 Kg. x 5 gm.

201.29 Basin Crystalising, Round Bottom Porcleain : Glazed inside and outside, with spout. 

201.30 Crystalising Basin Without Spout : Borosilicate glass, flat bottom. 

201.34 Water Bath, Copper/Aluminium : Vertical sides, fitted with concerntric copper/ Aluminium rings and side handles. 

201.37 Water Bath Rectangular : Automatic temperature controlled. The bath is made of double walled heavely tinned inside and outside of Mild steel sheet, painted with hammertone, glass wool for insulation is provided. The top of the bath providedwith Concentric rings. The temperature is controlled by thermostat from above room temperature to 85° C with accurracy of± 1.0° C. The bath is provided with two pilot lamps, three pin plug and cord. Suitable for poeration on 220Volts AC. 

201.39 Sand Bath : Provides contimuous air blast using double action and convenient footplate. Particularly suited for use for experiements in aerodynamics, hydrodynamics, accelerated cooling and during etc. Stout beech board construction with leather bellows.

201.40 Squeeze Bulb : General purpose rubber bulb with single inlet/outlet hole, for use with pipettes etc. bulb capacity 15 cm3
Neck 6.3 internal diameter.

201.41 Pump Bulb : For circulation gas or air through equipment, e.g. gas washing bottles. The bulb has rigid inlet connecting tubes fitted with one-way valve so that bulb always pumps in one direction.
Bulb capacity 60 cm3.
Outlet tubes 6.3 mmm external diameter.

201.42 Bottle Reagent, N.M. Glass : Narrow mouth with dustproof flat stopper of glass/Polythene.