General  > Pharmaceuticals and Pharmacology  > Page 1
Total 6 pages in this category :   1 |  2 |  3 |  4 |  5 |  6  
TABLET SECTION

BLENDER 10110
Electric operated with speed control.

BALL MILL 10112
Motor driven capacity 1Lt., 2Lt., 5Lt., Mill S.S.

DISINTEGRATION TEST MACHINE 10115
(a) Electrically operated, suitable for finding out disintegration of tablets. The machine complies with the specifications as per Indian pharmacopeia. 1958 Single Basket.
(b) same as above as above, but the machine compiles with the specified as per I.P., USP standard with 2 basket.

DISINTEGRATOR 10116
Polished hopper with 2” diameter, over fitted with electric motor single phase; to work on 220 volts A.C. Consisting of Four steel hammers fixed to a disc of 3” dia through which passes a shaft being revolved at approx. 3000 rpm. The hammers are enclosed in a drum. The lower part of the drum is made of detachable screen (Sieve) of different mesh i.e. coarse, media and fin are supplied.

DISINTEGRATOR (Double Basket)10117

DISSOLUTION RATE TEST 10118
For determination of dissolution rate test to tablet of USP xvii STD complete with water constantly in motion and holding the temperature at 37ºC ±0.5ºC through the test 1000ml. Capacity cylindrical vessel with its slides are flanged near the top to accept a fitted cover having 4 parts. The motor speed is controlled with speed regulator in a range of 25 to 150 R.P.M. cylindrical stainless steel basket to hold the samples is of grade 316 stainless steel.

FRIABILITY TEST APPARATUS 10120
Specially designed for finding out durability of tablets from the time of production to the time of use, as it is important to test the abrasion and impact hardness of tablets.
a. Same as above but with single drum.
b. Same as above but with double drum.

GRANULATING SIEVE 10122
Rain forced stainless steel fitted with wooden frame size 9”x7” & 10”x8”

HAND GRIND MILL 10124
With adjustable for making coarse and fine powder on metallic stand.

TABLET MAKING MACHINE 10126
Size of the die and punch 9mm automatic compression and ejection device with revolution of the wheel drive. Automatic feed, removal of tablets. The unit is built on a heavy cast or mild steel fabricated with acentric pressure system. Hopper provided and connected by a rubber tube. Easy setting for thickness and hardness of tablets. Complete with one die and set punch of chromium steel. Tablets making machine motor driven.
Hammer Type: Heavy duty with ½ H.P. electric motor, single phase to work on 220 volts AC.

TABLET MAKING MACHINE (Hand Operated) 10128
Useful for making tablets upto 100 mg. Size of Punch & die of 9mm. Automatic compression and ejection device has been provided, actuated by revolution of the wheel drive. Feed and removal of tablets has also been made automatic. Accentric pressure system has been applied for easy setting of thickness and hardness of tablets. A S.S. hopper has been given .
The unit has been mounted on a mild steel fabrication. Complete with one die and punch set made of chromium steel.

TABLET HARDNESS TESTER (Monsanto type) 10132
Useful to take quick readings from 0-20Kg Pressure for hardness. The equipment is made of gunmetal and richly chrome plated. The index and division of reading is 0.1Kg. Complete in box.

TABLET HARDNESS TESTER (Pfizer Type) 10135
Complete with dial guage. Richly chrome plated machine parts. Useful to take quick readings on dial, more accurate in gms. All contact parts made of Stainless steel.
a. 0-10 Kg. b. 0-20 Kg.

BULK DENSITY APPARATUS 10137
To determine the density of the powder GRADUATED CYLINDER holded in clamps moves through motor up and down direction at a frequency rate between 28/32 cycles per minute through a distance of 5-6cms. which strikes on a cushion fitted on the platform. A timer is provided to set the duration.

TABLET COATING PAN 12” MADE OF STAINLESS STEEL 10140
Polishing pan made of mild steel provided with inner of superior canvas cloth.

TABLETS POLISHING PAN 10142
Mansanto Type, Pfizer type 10Kg., Pfizer type 20 Kg.

TABLET COUNTER 10144
For 100 tablets.

LIQUID SECTION

TINCTURE PRESS 10148
Capacity 1 litre vessel and contact parts made of stainless steel sheet duly perforated. Complete with screw press.

BOTTLE SEALING MACHINE 10162
Portable model hand operated

BOTTLE/CAP SEALING MACHINE 10163
Hand operated with two extra cap. holder of different size.

FILTRATION EQUIPMENT 10165
Having following :
a. Membrane filter holder dia 47mm
b. Buckner funnel of stainless steel
c. Vaccum flask

FILTRATION ASSEMBLY COMPLETE 10166
Contact part of S.S.
a. Pressure vessel S.S. 20 Ltr. b. 1/4 H.P. motor compressor with tank.

MIXER 10169
Stainless Steel Vessel, fitted with motorised stirrer.
a. 5Ltrs. b. 10Ltrs. c. 25Ltrs.

EMULSIFIERS 10170
For preparing emulsions with different particle size, fitted with motorised stirrer.

BOTTLE WASHING MACHINE 10172
Sealed motor fitted with different holders along with chamber for bottle washing.

BOTTLE FILLING MACHINE 10173
Volumetric type to allow filling of bottles of different volumes.

LABORATORY MILL (Willey Type) 10177
For preparation of samples for analysis with minimum loss of moisture of volatile constituents. Weight distribution and balancing of rotating parts has been adjusted to provide greater stability and quiter performance with reduced vibration. Suitability for wider variety of commercial materials, fitted with motor supplied with nickel plated hopper of 50mm dia with cover, three delivery sieves (having tops of 20, 40 and 80 mesh respectively), plastic receiver, brush, L-N key, cord and plug. Suitable to operate on 220Volts AC, 50Hz , single phase supply.
a. 1/4 HP motor and hooper of 50mm dia
b. 1/2 HP motor and hooper of 75mm dia
c. 1 HP motor and hooper of 100mm dia

Contact Us  |   Site Map  |   Certifications  |   Copyright © Essco