Physics  > Measurements, Weights, Balances  > Page 1
Total 7 pages in this category :   1 |  2 |  3 |  4 |  5 |  6 |  7  
RULE, STEEL 1001  
Double sided with permanently etched graduations 8ths, 16ths, 32nds, 64ths, cm & mm.
(a) Steel Rule 6” x ¾”, 150 x 19mm
(b) Steel Rule 12” x 11/8”, 300 x 30mm

ENGINEERS STEEL RULES 1002  
Made from stainless steel, fully hardened, rust and wear resistant. Graduations marked on clear satin-chrome finish with double mm scale.
(a) 150mm (b) 300mm (c) 1000mm

RULE (Hardwood) 1002-a  
12 inches long School Rule, with two beveled edges, 300mm long, graduated in cm, mm & 4ths, 8ths, 10ths, 12ths and 16ths of inch.

MEASURING/RULER STICKS (Hardwood) 1003  
25mm wide, with clear polish, natural colour.
 SizeGraduationsFraction
(a)1 Metercentimetersmillimeter
(b)½ Metercentimetersmillimeter
(c)1 YardInches4th's & 8th's
(d)½ YardInches4th's & 8th's
(e)1 Meter & 1Yardcentimeters+Inchesmillimeter+eighth's
(f)millimeter+eighth'scentimeters+Inchesmillimeter+eighth's
 Available with Plain or Metal Ends. Please specify while ordering.

PROTRACTORS 1004-b  
Plastic, divided in full degrees and calibrated at each 10º.
(a) Circular Protectors (360º) (b) Half-Circle Protector (180º)

CALIPER GAUGE, DIRECT READING, VERNIER 1008  
Steel, with double scale 0 to 120mm x 0.1mm and 0 to 5 x 1/28th inch for internal and external measurements and depth gauge, with fine adjustment thumb wheel.

VERNIER CALIPER 1010  
Plated steel, Columbus type calliper enabling the user to read either inside, outside or depth measurements. With dual scape 0-120 mm x 0.1 mm. Imperial scale graduated to 5 x 1/128 inches provided with thumb wheel for easy motion of jaws, in plastic case.

VERNIER CALIPER 1011  
IME type , plated steel with dual scale 0-150 mm x 0.1mm, and 6x1/28 inches, provided with thumb movement for easy motion of jaws, in velvet lined box/plastic case.

VERNIER CALIPER 1015  
Steel for internal and external measurements.

VERNIER CALIPER 1018  
Standard workshop model with stop screw, 4-way measurement. Screw slider model made of hardened stainless steel with engraved graduation in both millimeters and inches. Measuring surface is micro-lapped.
 RangeScaleJaw Lenght
(a)0-150mm0.05mm40mm
(b)0-300mm0.05mm65mm

DUAL CALIPER 1019  
Stainless Steel high precision vernier caliper with solid slider and 4-way measurement. Dual reading (mm and inches) chromed scale with engraved graduations. The measuring surface is micro-lapped. Quickly adjustable model with roller button. Rack cover prevents dust or grit from fouling teeth of rack.
 RangeScaleJaw Lenght
(a)0-150mm0.05mm40mm
(b)0-200mm0.05mm50mm
(c)0-300mm0.05mm65mm

OUTSIDE MICROMETER 1020  
Standard workshop model outside micrometer according to DIN 863. The micrometer has a forged steel body with insulated grip and is tapered for easier access to difficult areas. It has a satin-chrome scale graduated in 0.01mm div. and also features a tungsten carbide measuring face with constant force ratches as well as a ratchet clutch. The micrometer comes packed in a plastic/wooden box with standards and adjusting key.
 RangeScale
(a)0-25mm0.01mm
(b)25-50mm0.01mm
(c)50-75mm0.01mm
(d)75-100mm0.01mm

Contact Us  |   Site Map  |   Certifications  |   Copyright © Essco